
Packaging
20 kg grey bag | 20 kg white bag
Adhesives for natural stone cladding
Ready to mix | Self curing | Easy to use | High compressive strength | Tile on tile application | High bond strength | Submerged conditions | Wall cladding | Heavy duty applications | Single component product | Low prorosity tiles | High durability
Support
Wall, Floor
weberset firm is a highly polymer modified, high-performance thin-set adhesive, for tiles, mosaics and stones, on a variety of surfaces, for both vertical and horizontal application, in indoor as well as outdoor use. It is supplied as a dry mix mortar, to which water needs to be added before application.
- Internal and external use.
- Highly polymer-modified: provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
- Can be used for new construction, as well as for renovation over existing floors/facades.
- Long open time.
- Prolonged and easy workability.
- Low VOC – for healthy living.
- No Hacking of substrate required to achieve the required bonding.
- Self-curing properties, which allows for no-hassle application, with minimum labour.
- The free-flowing product makes it easier to mix and apply.
- No-sag formula: allows for hassle-free application on vertical walls, without any slippage.
- Water-resistant, making it suitable for swimming pools, bathrooms, kitchen, saunas, and spa.
- Sustains heat ageing, making it ideal for high-temperature locations for outdoor use, and also for hot temperature applications, like Jacuzzi, sauna etc.
- No shrinkage prevents debonding and gives longer life to tiles and stones.
- Absorbs dynamic load.
- Useful for bed thickness of 3 – 12 mm. May go up to 15 mm in a limited extent.
- Do not use on wet screed or plaster. The surface must be fully cured.
- Do not use on gypsum plaster or boards, fibre cement boards, or other drywall partitions.
- Can only be used on cementitious waterproofing. Don’t use on epoxy or polyurethane waterproofing.
- Do not use for Installing glass tiles or metal tiles. Use only Weber bond poxy, for fixing glass and metal tiles.
- Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact weber representative for fixing these.
- Do not use on surfaces subject to vibrations. Use weberset flex for vibration prone areas.
- Do not use for fixing artificial stone or impregnated stone. Use weberset ultra for the same.